Description

Do you need a programmer to load the Arduino firmware onto your Atmel device, these will get the job done. Also take a look at our 10 to 6 pin ICSP converter.

Specifications

• Support for AVRDude from version 5.2 onwards
• Allows you to to read or write the micro controller EEPROM, firmware, fuse bits and lock bits
• Support for Linux, OS X and Windows (will work on vista)
• 5 KB/sec maximum write speed
• Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
• 10 pin ISP interface

Supported Controllers;

• Mega Series
• ATmega8 ATmega48 ATmega88 ATmega168 ATmega328
• ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16
• ATmega161 ATmega162 ATmega163 ATmega164 ATmega169
• ATmega2560 ATmega2561 ATmega32 ATmega324 ATmega329
• ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649
• ATmega6490 ATmega8515 ATmega8535
• Tiny Series
• ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26
• ATtiny45 ATtiny85 ATtiny2313
• Classic Series
• AT90S1200 AT90S2313 AT90S2333 AT90S2343 AT90S4414
• AT90S4433 AT90S4434 AT90S8515

• AT90S8535 
  CAN Series
  AT90CAN128 
  PWM Series
  AT90PWM2 AT90PWM3

Driver Installation: https://sparks.gogo.co.nz/usbasp_drivers.html

Hardware Usage: https://circuitdigest.com/microcontroller-projects/how-to-program-avr-microcontroller-atmega16-with-usbasp-programmer-using-atmel-studio