Cube Cell (PSoC with LORA Radio)
Cube Cell (PSoC with LORA Radio)
Cube Cell (PSoC with LORA Radio)
Cube Cell (PSoC with LORA Radio)
Cube Cell (PSoC with LORA Radio)
Cube Cell (PSoC with LORA Radio)
Cube Cell (PSoC with LORA Radio)
Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)
  • Load image into Gallery viewer, Cube Cell (PSoC with LORA Radio)

Cube Cell (PSoC with LORA Radio)

Regular price
R 450.00
Sale price
R 450.00
Regular price
Sold out
Unit price
per 
Tax included.

Description

This little device is not just a Arduino compatible module but it also has an Arduino radio built in and it's optimised for power consumption. This is truly a very handy little device and you can get that IOT development up and running in no time!

Specifications

Technical Parameters:

Parameter Specification
MCU ASR6501 (48 MHz ARM® Cortex® M0+ MCU, 128KB FLASH, 16KB SRAM )
LoRa Chip ASR6501 (On board Semtech® LoRa® Transceiver SX1262)
LoRa working band 433mHz
LoRa maximum output power 22 ± 1dB
Hardware resources UART x 1; SPI x 1; I2C x 1; SWD x 1; PWM x 3
12 – bits ADC; 8 – channel DMA
6 x GPIO
FLASH 128KB internal FLASH
Interface Micro USB x 1; LoRa (IPEX) x 1
Size 41.5 x 24.1 x 7.2 mm
USB-UART bridge CP2102
Battery Type 3.7V Lithium (SH1.25 x 2 socket)
Battery detection circuit
External device power control(Vext)
Low power design Deep Sleep 3.5uA

Electrical characteristics:

Electrical characteristics condition Minimum Typical Maximum
Power Supply USB powered (≥500mA) 4.7V 5V 6V
Lithium powered(≥250mA) 3.3V 3.7V 4.2V
3.3V(pin)powered(≥150mA) 2.7V 3.3V 3.5V
5V(pin)powered(≥500mA) 4.7V 5V 6V

Heltec Cubecell ASR6501 LORA IOT Development board

Resources


More document click to download:

https://heltec.org/project/htcc-ab01/